The design of aluminum alloy pipeline energy-saving pipeline can be said to be various, which is much richer than the material of energy-saving pipeline. The installer visits the site in advance, gives the design drawing and material budget according to the situation of the air compressor room on the site, and then negotiates the material application of the air compressor pipeline and the cost settlement with the boss after completing the basic framework.

The aluminum alloy pipe is a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing and is hollow along its longitudinal full length. There may be one or more closed through holes with uniform wall thickness and cross section. Aluminum pipes can be divided into square pipes, round pipes, patterned pipes and special pipes according to their shapes. Guangdong xinlianchang is an aluminum pipe, industrial aluminum material and aluminum profile manufacturer with nearly 20 years of experience in aluminum industry.

The heat tracing pipe shall not be directly spot welded on the main pipe; For heat tracing pipes that are not allowed to directly contact with the main pipe, isolation pads shall be set between the heat tracing pipes and the main pipe; When the heat tracing pipe passes through the main pipe flange and valve, removable connectors shall be provided.

When the aluminum alloy pipe, valve and metal pipe are connected by flange or thread, the valve shall be installed in the closed state; When connected by welding, the valve shall be installed in the open state, and argon arc welding shall be adopted for the bottom layer of butt weld. When non-metallic pipes are connected by electric fusion or hot fusion, the valves near the joints shall be open.