The thin-walled stainless steel pipe should also avoid being immersed in water for a long time during storage. Although the corrosion of water is very slow, the quality will be affected if it is in contact with water for a long time.

Stainless steel super pipe has good plasticity and toughness, but it is easy to produce work hardening. If this kind of work hardening is misunderstood as high hardness, so as to reduce the back cutting amount and feed amount during cutting, the edge of the cutting tool will be easily damaged in the part where the work hardening is always cut. However, as long as the back cutting amount and feed amount are increased, stainless steel is not difficult to cut.

The surface of the industrial grade stainless steel super pipe is silver white, with a thickness of more than 2.0mm. If it is necessary to make workpieces or the pressure required is relatively large, the size and thickness of the steel pipe can be customized. The surface of stainless steel sanitary pipe is polished inside and outside, and the mirror is the same. The thickness is generally between 1.2 and 2.0.

Thin wall stainless steel super pipes have relatively high strength, so they are generally stacked together. However, certain principles should be followed when stacking, otherwise the stainless steel pipe may be damaged or inconvenient to take. The purpose of ventilation is to prevent the thin-walled stainless steel pipe from being in the humid air for a long time, so that the moisture can be discharged in time. Of course, waterproof work should be done well when it rains.