All high-purity and clean gases in the compressed air pipeline system in Dalian need to be transported to the instrument point of use (POU) through the pipeline. In order to meet the quality requirements of the instrument for the gas, when the gas outlet index is certain, more attention should be paid to the material selection and construction quality of the piping system.

When necessary, Dalian compressed air pipeline can be equipped with an air tank in the middle of the pipeline. The ring pipe is equivalent to a pressure vessel, which can ensure that the pressure is the same everywhere in the air compressor pipeline. In addition, when selecting the air compressor, a certain amount of compressed air shall be reserved to make up for the loss of pressure flow.

The compressed air pipeline system in Dalian is provided with valves, pressure reducing devices, oil and water drains, compensators, gas distributors and meters, which are selected and processed according to the design drawings. Appearance inspection shall be conducted for pipes and fittings. The pipes of high-pressure pipelines shall be subject to nondestructive testing by magnetic flaw detection and other methods. The pipes shall be derusted and coated with anti rust paint before processing, and the valves shall be cleaned, ground and hydrostatic tested.

After the pipeline is hoisted in place, alignment and adjustment shall be carried out. After the elevation, center line and slope are correct, connection and fixation shall be carried out. The air compressor energy-saving pipeline system can be installed on the wall or ceiling, and its series of accessories can be manufactured. You can customize the compressed air system according to your specific production needs.