Dalian compressed air pipeline contains a large amount of water, impurities and oil, and forms weak acidic gas, which causes corrosion to seamless steel pipes, especially the welded parts or damaged parts. Artificial welding is easy to cause false welding points and easy to leak, and the leakage points are difficult to find. The rough pipe wall causes large initial pressure drop and increases energy consumption. For every 1 bar increase in pressure drop, the power of the air compressor shall be increased by at least 7%.

All high-purity and clean gases in the compressed air pipe road system in Dalian need to be transported to the instrument point of use (POU) through the pipeline. In order to meet the quality requirements of the instrument for gases, under the condition that the gas outlet index is certain, more attention should be paid to the material selection and construction quality of the piping system.

The energy-saving pipe fittings of the press adopt anti-corrosion design to ensure no leakage installation and eliminate energy waste. Great flexibility: the energy-saving pipe of the air compressor can be installed with a quick steering device at any time to build an additional branch pipe, because it is a side connected connection, thus eliminating the risk of condensate pollution. The branch pipeline must be connected from the top of the main pipeline to prevent the condensate in the main pipeline from flowing to the compressor unit along the pipeline.

After the Dalian compressed air pipeline is hoisted in place, it shall be aligned and adjusted. After the elevation, center line and slope are correct, it shall be connected and fixed. The air compressor energy-saving pipeline system can be installed on the wall or ceiling, and its series of accessories can be manufactured. You can customize the compressed air system according to your specific production needs.