Aluminum alloy pipes have the advantages of good hygiene performance. They are all special polyethylene materials, clean and non-toxic, and can block light and air. Long service life, relatively stable material, adding enough stabilizer to strengthen its anti-aging performance, better than stainless steel elbow.

Regular inspection shall be carried out to keep it clean. After the liquid is transported, it shall be thoroughly washed to reduce the corrosion and leakage of the movable elbow. The wall thickness of each part of the movable elbow shall be optically inspected regularly. When the wall thickness is reduced by 20%, it shall be replaced with a new one. Buy products that meet the standards.

Install carefully according to the instructions. The union type is adopted for installation and connection, which is convenient for use. During installation, the elbow can be directly installed on the pipeline according to the connection mode and installed according to the position of use. Generally, it can be installed at any position of the aluminum alloy pipeline, but it needs to be convenient for operation and maintenance. Note that the medium flow direction of the cut-off aluminum elbow should be upward from the bottom of the longitudinal valve disc, and the aluminum elbow can only be installed horizontally.

Generally, it can be installed at any position of the aluminum alloy pipe, but it needs to be convenient for manipulation and inspection. Note that the elbow can only be installed horizontally to stop the flow of the elbow medium. During the installation of elbows, attention shall be paid to the tightness to prevent leakage and affect the normal operation of the pipeline. If the surface paint is peeled off during assembly and use, it shall be repainted.